X Series E53 X5 4.8is (N62-S) OFFRD
Slacken nut (1).
Withdraw fuel filler pipe (2) completely out of rubber gaiter at
wheel housing.
Caution!
After installing fuel filler pipe, check electrical resistance
between grounding lead (tank filler pipe) and wheel hub.
Measured value: approx. 0.6
Ω
Unfasten hose clip (1).
Installation:
Replace hose clamp.
Tightening Torque, refer to 16 12 7AZ.
Detach vent line (2) with hose (2) from fuel filler pipe (3).
RA Removing and installing or replacing fuel filler pipe
BMW AG - TIS
12.02.2013 05:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
