X Series E53 X5 4.8is (N62-S) OFFRD
17 11 370
Removing and installing/replacing cooling
loop for power steering
Caution!
Make sure all parts are absolutely clean.
No dirt is allowed to enter the system.
After installation, bleed power steering.
Recycling:
Draw off power steering fluid from supply tank - do not reuse fluid.
Observe country-specific waste-disposal regulations.
Disconnect quick-release couplings on hydraulic lines.
Remove radiator.
Remove cooling coil.
RA Removing and installing/replacing cooling loop for power steering
BMW AG - TIS
12.02.2013 05:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
