X Series E53 X5 4.8is (N62-S) OFFRD
-
Release propeller shaft from transmission.
-
Release center bearing.
-
Tie propeller shaft to one side.
Tasks are described in Removing propeller shaft.
Note:
N62 only:
Detach plug (1) from speed sensor.
Release screw (2) and remove speed sensor.
•
Unlock and disconnect plug (1) by turning.
•
Release cable from retainers.
•
Insert special tool 24 2 390 in sealing sleeve.
These tasks are described in Notes on mechatronics.
(Important: Observe important note)
N62/N62S only!
Press in retaining lugs (1) with screwdriver (2), remove cable
duct (3) and tie to one side.
RA Removing and installing automatic transmission (6HP26Z)
BMW AG - TIS
12.02.2013 05:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -