X Series E53 X5 4.8is (N62-S) OFFRD
27 10 020
Installing replacement transfer box (ATC 500
X-Drive)
Important!
After replacement, the "Repair" service function must be
carried out with GT1.
Recycling:
Catch and dispose of escaping transmission oil. Observe country-
specific waste-disposal regulations.
Important!
After completing work, check gear oil level and top up if
necessary.
Filler plug (1):
Tightening torque 27 2 7AZ
.
Oil level to lower edge of filler plug (1).
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the transfer case!
Necessary preliminary tasks:
-
Drain gear oil at oil drain plug.
Tightening torque 27 2 11AZ
.
-
Remove transfer box.
RA Installing replacement transfer box (ATC 500 X-Drive)
BMW AG - TIS
12.02.2013 06:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
