X Series E53 X5 4.8is (N62-S) OFFRD
Remove drive flange with special tool 33 1 150 .
Drive a hole into radial shaft seal (2) using a center punch (1).
See illustration.
Important!
Do not use a drill as drillings may result in transmission
malfunction.
Install special tool 23 0 490 .
Drive out radial shaft seal (1) with impact weight (2).
Drive in radial shaft seal with special tool 27 1 380 .
Installation:
Radial shaft seal must rest flush on housing.
RA Replacing radial shaft seal for output flange
BMW AG - TIS
12.02.2013 06:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
