X Series E53 X5 4.8is (N62-S) OFFRD
51 47 490
Removing and installing/replacing front
assembly underside protection
Unfasten screws (2 and 3).
Pull forward assembly underside protection (1) under bumper
trim and wheel arch trims (4) on left/right.
Installation:
Make sure wheel arch trims (4) on left/right are correctly seated.
Center underside protection (1) and tighten down
screws (2 and 3).
RA Removing and installing/replacing front assembly underside protection
BMW AG - TIS
12.02.2013 06:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -