X Series E53 X5 4.8is (N62-S) OFFRD
Guide joint tightly seated in swivel bearing:
Important!
The guide joint must be replaced once it has been driven out
with the special tools.
Secure special tool 33 4 205 to guide joint.
Drive guide joint out of swivel bearing with special tool 33 4 200 .
Important!
Screw on nut a few turns so that guide joint does not slip off
unchecked when forced off.
Screw on nut a few turns.
Press guide joint with special tool 31 2 240 out of tension strut.
Unscrew nut and remove guide joint.
RA Removing and installing/replacing guide joint in swivel bearing
BMW AG - TIS
12.02.2013 06:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
