X Series E53 X5 4.8is (N62-S) OFFRD
32 00 620
Adjusting rear axle
Special tools required:
•
32 3 151
•
32 3 152
Note:
A camber change always means a toe change as well. The
camber must therefore be adjusted first.
Adjusting camber:
Replace nut (2) and tighten to 5 Nm.
Turn eccentric bolt (1) to adjust camber to setpoint value.
Tighten nut (2).
Tightening torque 33 32 20AZ
.
Adjusting toe:
Replace nut (2) and tighten to 5 Nm.
Turn eccentric bolt (1) to adjust toe to specified value.
Tighten down nut (2) with special tools 32 3 151 and
32 3 152 .
Tightening torque 33 32 5AZ
.
RA Adjusting rear axle
BMW AG - TIS
12.02.2013 06:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -