X Series E53 X5 4.8is (N62-S) OFFRD
Release screws and press heating valves to one side.
Release clamping screw.
Detach double joint from power steering gear.
Pull out lower section of steering shaft from inside through
bulkhead.
Installation:
Replace clamping screw.
Tightening torque 32 31 1AZ
.
RA Removing and installing / replacing lower section of steering spindle
BMW AG - TIS
12.02.2013 07:10
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
