X Series E53 X5 4.8is (N62-S) OFFRD
32 31 103
Replacing sleeve for steering spindle
(assembly partition wall)
Necessary preliminary tasks:
•
Remove lower section of steering spindle
After installation:
•
Carry out steering angle sensor adjustment
Remove sleeve from assembly partition wall.
Installation:
Grease/spray sleeve from outside with silicone grease.
Align sleeve by way of arrow (1) to assembly partition wall and
insert.
Insert plastic ring (2) in sleeve.
RA Replacing sleeve for steering spindle (assembly partition wall)
BMW AG - TIS
12.02.2013 07:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
