X Series E53 X5 4.8is (N62-S) OFFRD
33 41 000
Replacing drive flange on left/right rear axle
shaft
Special tools required:
•
33 2 116
•
33 2 160
•
33 2 201
•
33 4 200
Apply handbrake.
Remove rear wheel.
Unscrew collar nut.
Remove brake disc.
Installation:
Replace collar nut, apply a light coating of oil to contact surface
and tighten down.
Tightening torque 33 41 3AZ
.
Secure collar nut by peening on flat areas of output shaft.
Force drive flange with special tools 33 2 116 / 33 2 201 ,
33 2 160 , 33 4 200 and 5 wheel bolts out of wheel bearing.
Note:
Rounded inside edge of special tool 33 2 160 must point to drive
flange.
Important!
The wheel bearing is destroyed when the drive flange is
removed and cannot be reused!
Replace wheel bearing.
Installation:
Oil drive flange lightly and attach to splines of output shaft.
Draw drive flange into wheel bearing.
RA Replacing drive flange on left/right rear axle shaft
BMW AG - TIS
12.02.2013 08:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
