X Series E53 X5 4.8is (N62-S) OFFRD
Disconnect plug connection for brake lining sensor.
Pull off fist caliper towards rear of vehicle.
Installation:
Install brake hose without torsional stress.
If possible, do not replace seal between brake hose and brake
caliper!
Only replace the seal if it is damaged.
First tighten the brake hose on the brake cover, then tighten
connection on brake line.
Tightening torque, 34 32 1AZ .
Caution!
Check routing and securing of brake-pad-wear indicator
cable. Check for correct securing with tab of dust cap. It is
absolutely essential to prevent the cable on the rim from being
scuffed.
RA Removing and installing or replacing left or right rear brake caliper
BMW AG - TIS
12.02.2013 08:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
