X Series E53 X5 4.8is (N62-S) OFFRD
Unfasten brake lines.
Installation:
Tightening torque 34 32 1AZ
.
Remove cover (1) from line aperture.
Pull the vacuum hose (3) off of the brake unit.
Release hexagon nuts (1) and withdraw master brake cylinder (2)
from brake booster (3).
Installation:
Replace self-locking nuts.
Tightening torque 34 31 1AZ
.
Installation:
Replace O-ring (1).
RA Removing and installing/replacing master brake cylinder for DSC
BMW AG - TIS
12.02.2013 08:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
