X Series E53 X5 4.8is (N62-S) OFFRD
1.
Setting instruction for brake shoes (basic setting)
Lift out dust cover.
Using special tool 34 1 030 , release lock nuts and completely
loosen Bowden cables.
Installation:
Secure adjustment nut with lock nut.
Completely unscrew one wheel stud on each rear wheel.
Turn wheel until tapped hole is located at bottom.
Installation:
Install and tighten wheel bolt.
Tightening torque,
refer to Technical Data 36 10 1AZ.
Turn adjusting screw with a screwdriver until the wheel is no
longer able to turn.
Then unfasten the adjusting screw 12 notches.
RA Adjusting handbrake
BMW AG - TIS
12.02.2013 08:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -