X Series E53 X5 4.8is (N62-S) OFFRD
34 41 000
Removing and installing handbrake lever
Installation:
After completing work, adjust handbrake
Remove rear compartment fan.
Release lock nuts on Bowden cables and turn down completely.
Remove cover (1).
Detach cable for handbrake indicator switch by pressing down
contact plate.
Press carpet floor to one side.
Release screws (2 and 3) and remove handbrake lever.
Installation:
Tightening torque 34 41 1AZ.
RA Removing and installing handbrake lever
BMW AG - TIS
12.02.2013 08:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
