X Series E53 X5 4.8is (N62-S) OFFRD
Press control unit onto hydraulic unit and install screws (1) + (2)
uniformly (do not tighten down) until control unit rests evenly on
hydraulic unit.
Install screws (1) - (6), do not tighten down.
Tighten down screws (1) - (6) in specified sequence with a torque
wrench.
Installation:
Replace screws.
Tightening torque 34 51 1AZ.
RA Removing and installing/replacing DSC control unit
BMW AG - TIS
12.02.2013 08:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -