X Series E53 X5 4.8is (N62-S) OFFRD
36 10 300
Removing or installing front or rear wheel
Special tools required:
•
36 1 250
Important!
Wheel was balanced electronically.
Follow instructions on initializing Run Flat Indicator (RPA).
Observe the following procedure to prevent shift errors and
imbalance:
-
Loosen wheel bolts.
-
Wheel positioned with valve facing down.
-
If several wheels are simultaneously removed, mark
installation location of wheels on tires (e.g. with a piece of
chalk).
-
Mark wheel with respect to wheel hub.
-
Mark out lockable wheel bolt in relation to wheel.
-
Release wheel bolts and remove wheel.
Important!
Contact surfaces between:
-
Brake disk and disk wheel
-
Brake disk and wheel hub must be free from grease.
RA Removing or installing front or rear wheel
BMW AG - TIS
12.02.2013 08:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
