X Series E53 X5 4.8is (N62-S) OFFRD
Note:
Wait approx. 2 minutes until the pressure in the pressure
accumulator has been completely reduced (hissing sound
ceases).
Carefully slacken banjo bolt until the sound of escaping air can be
heard.
Installation:
Check banjo bolt for dirt, clean if necessary.
Tightening torque 37 12 3AZ
.
Release banjo bolt and remove pipe.
Remove protective cap.
Press quick coupling (1) downwards, press retaining ring (2)
together and detach pipe.
Installation:
Keep sealing rings (1, 2) free of grease.
Make sure sealing rings (1, 2) are correctly seated.
Unscrew nuts (1).
Remove air reservoir (2) with pipe.
RA Removing and installing / replacing left or right air reservoir
BMW AG - TIS
12.02.2013 09:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
