X Series E53 X5 4.8is (N62-S) OFFRD
41 61 000
Removing and installing hood lid
Disconnect connector from heated windshield washer jets.
Disconnect hose connection from windshield washer unit.
Release screw (1).
Loosen screw (2).
Remove hood lid.
Installation:
Install engine hood at screw locations to on hinge. This dispenses
with the need for adjustment after installation.
If this is not possible, adjust engine hood.
RA Removing and installing hood lid
BMW AG - TIS
12.02.2013 10:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -