X Series E53 X5 4.8is (N62-S) OFFRD
51 12 000
Removing and installing complete rear
bumper (HP)
Note:
Refer to KSD CD for details of preliminary tasks.
Unclip cover (1) with assembly wedge (2) and unhook in
direction of arrow.
Release screws (1) on left and right.
Lift out wheel arch trim (2) on left and right.
Release nuts (1) on left and right.
Installation:
Observe tightening torque, 51 12 3AZ
.
RA Removing and installing complete rear bumper (HP)
BMW AG - TIS
12.02.2013 10:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
