bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

12 RA Removing And Installing_replacing Interior Rearview Mirror (with Japanese Toll M > < 11 RA Removing And Installing_replacing Interior Rearview Mirror (with _X_ Cable And P
Page 2
background image

Lever out plug trim cover in direction of arrow and disconnect plug
connection underneath.

Important!

Risk of damage!

Do not pull off rearview mirror (1) from windscreen against
direction of travel and or snap out by turning.

Snap out interior mirror (1) from mirror mount (2) towards front
with increasing pressure (not abruptly) and remove.

Installation:

1.

Twist mirror foot by approx. 45

°

 and fit to mirror mount.

2.

Turn mirror foot until it engages on mirror base.

Only replace with version with remote control for central
locking:

Initialize all transmitters (ignition keys), refer to Owner's
Handbook.

RA  Removing and installing/replacing interior rearview mirror (with "X" cable and p

BMW AG - TIS

12.02.2013  10:57

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

12 RA Removing And Installing_replacing Interior Rearview Mirror (with Japanese Toll M > < 11 RA Removing And Installing_replacing Interior Rearview Mirror (with _X_ Cable And P