X Series E53 X5 4.8is (N62-S) OFFRD
51 16 210
Removing and installing/replacing trim for
preselector knob
Note:
Apply handbrake and move preselector knob (1) max. to rear (risk
of damage to interior mirror).
Do not twist preselector knob (1) when removing; otherwise
turning lock in knob (1) will be sheared off.
Pull off preselector knob (1) with a forceful jerk.
Installation:
Fit preselector knob (1) onto selector lever, align and press down
until it can be felt to snap into place.
Installation:
Push rubber gaiter (1) down until groove (2) is fully exposed.
Remove trim (1) with rubber gaiter (2) from center console.
Disconnect plug connections (1) and remove trim (2).
RA Removing and installing/replacing trim for preselector knob
BMW AG - TIS
12.02.2013 11:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -