bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

10 RA Removing And Installing_replacing Outside Handle And Lock Actuator From Left Or |Page 1812 > < 9 RA Replacing Cover On Outside Handle With Locking Cylinder
Page 1
background image

51 21 200

Removing and installing/replacing outside
handle and lock actuator from left or right
front door 

Remove sound insulation on front door.

Remove outside handle on front door.

Remove seals (1) and (2) for outside handle.

Unclip ball head (1).

Detach Bowden cable (2) from support (3) on door lock.

Loosen bolt (1).

Lift out lock actuator (2) towards front and remove to inner door
panel.

Installation:

Guide (3) must be located outside metal edge (4).

Lock actuator (5) must be flush with guide (6).

RA  Removing and installing/replacing outside handle and lock actuator from left or 

BMW AG - TIS

12.02.2013  11:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Removing And Installing_replacing Outside Handle And Lock Actuator From Left Or |Page 1812 > < 9 RA Replacing Cover On Outside Handle With Locking Cylinder