X Series E53 X5 4.8is (N62-S) OFFRD
51 21 140
Removing and installing/replacing complete
lock cylinder
Remove plate (1).
Installation:
Fit new plate (1).
Release screw (1).
Removing cover (1) on outside handle:
A
Pull cover (1) approx. 1 ... 2 mm towards rear.
B
Detach cover (1) with lock barrel (2) towards outside.
Remove catches (1) and detach cover (2) from lock cylinder (3).
RA Removing and installing/replacing complete lock cylinder
BMW AG - TIS
12.02.2013 11:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -