bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Outside Handle And Lock Control On Left Or Rig|Page 1827 > < 4 RA Removing And Installing_replacing Cover On Outside Handle, Left Or Right
Page 1
background image

51 22 200

Removing and installing/replacing outside
handle and lock control on left or right rear
door

Remove sound insulation on rear door.

Remove outside handle on rear door.

Remove seals (1) and (2) for outside handle.

Unclip ball head (1).

Detach Bowden cable (2) from support (3) on door lock.

Slacken screw (1) (do not release fully).

Lift out lock actuator (2) towards front and remove to inner door
panel.

Installation:

Guide (3) must be located outside metal edge (4).

Lock actuator (5) must be flush with guide (6).

RA  Removing and installing/replacing outside handle and lock control on left or rig

BMW AG - TIS

12.02.2013  11:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

5 RA Removing And Installing_replacing Outside Handle And Lock Control On Left Or Rig|Page 1827 > < 4 RA Removing And Installing_replacing Cover On Outside Handle, Left Or Right