X Series E53 X5 4.8is (N62-S) OFFRD
51 24 ...
Removing and installing/replacing bottom left
or right lock support for rear lid
Releasing screw connection for rear lid at bottom:
Open rear lid until screw (1) is accessible (risk of injury by spring
tension).
With rear lid in this position, release screw (1) and insert in bore of
support (2).
Caution!
If the second support (2) is released for removal of the rear
lid, the rear bumper must be protected against damage.
Screw (1) remains in support (2) until installation.
Installation:
Fit spacer (3).
Note:
The work step "Releasing screw connection for rear lid at bottom"
ends here.
Removal and installation or replacement only:
Remove panel for roof pillar at rear.
Release screw on support at top and remove support.
RA Removing and installing/replacing bottom left or right lock support for rear lid
BMW AG - TIS
12.02.2013 11:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
