bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Rear Left Or Right Door Trim Panel|Page 1916 > < 1 RA Removing And Installing Rear Left Or Right Door Trim Panel
Page 2
background image

Release screws (1).

Lever out airbag label (2) and release screw underneath.

Unclip clips (1) of door trim panel with special tool  00 9 317
(trim panel wedge).

Carefully unclip door trim panel (1) at top with special tool 
00 9 317  (trim panel wedge).

Feed door trim panel (1) out of unlocking button (3).

Installation:

Bend open retainers (2) on inner door plate for accommodating
central clip.

Version with lighting for inside door handle:

If necessary, disconnect plug connection (1) on inside door handle
(2).

RA  Removing and installing rear left or right door trim panel

BMW AG - TIS

12.02.2013  11:59

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing Rear Left Or Right Door Trim Panel|Page 1916 > < 1 RA Removing And Installing Rear Left Or Right Door Trim Panel