X Series E53 X5 4.8is (N62-S) OFFRD
Note:
Position of butylene tape (1) on inner door plate.
Note:
Position of butylene tape (1) on sound insulation (2).
Clean specified adhesive area with adhesive cleaner (sourcing
reference: BMW Parts Service) .
Air drying time: 1 minute
Caution!
The adhesive areas must be dry and free from dust and
grease.
After cleaning, do not touch the adhesive areas with bare
hands.
Lay single row of 6 mm dia. butylene tape or double row of 3 mm
dia. tape (sourcing reference: BMW Parts Service) in specified
adhesive area.
Heat butylene tape (hot air blower) and press down firmly on
sound insulation all around.
Contact pressure with hand roller: approx. 30 N/cm
2
Manual contact pressure: approx. 10 N/cm
2
Note:
Firm thumb pressure has approx. 50 N/cm
2
RA Removing and installing/replacing sound insulation in rear door, left or right
BMW AG - TIS
12.02.2013 12:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
