X Series E53 X5 4.8is (N62-S) OFFRD
51 47 ...
Removing and installing/replacing left or right
underbody panelling
Necessary preliminary tasks:
•
Remove rear underbody protection
Left side with independent heating version only:
•
Remove exhaust pipe
Note:
The operation is described on the left side; proceed in the same
way for the right side.
If necessary, the vehicle must be set down on its wheel in the
meantime as not all the connecting elements are immediately
accessible.
Release clips/screws (1).
Press sill cover (1) and wheel arch trim (2) outwards and
release screws (3) underneath.
Feed out underbody panelling (4) downwards.
Installation:
Make sure underbody panelling (4) is correctly seated on wheel
arch cover at front and rear.
RA Removing and installing/replacing left or right underbody panelling
BMW AG - TIS
12.02.2013 12:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
