X Series E53 X5 4.8is (N62-S) OFFRD
51 71 080
Removing and installing/replacing heater
bulkhead
Detach sealing strips (1).
Turn toggles through approx. 90
°
.
Lift out cover (1).
Unfasten screws.
Pull out heater bulkhead (2).
Installation:
Check rubber seals (1) on left and right and replace if
necessary.
Coat rubber seals (1) on left and right with rubber protection
coating agent.
Heater bulkhead is guided at sides via guide channels.
Clean guide channels and coat with rubber protection coating
agent.
RA Removing and installing/replacing heater bulkhead
BMW AG - TIS
12.02.2013 12:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
