Removing and Installing Underride Protection for X Series E53 X5 48is (N62-S) OFFRD
Installation:
Fixtures (4) on brake air duct (5) must not be damaged.
Left only:
Lever temperature sensor (1) out of fixture (2).
Pull temperature sensor (1) with cable grommet (3) out of brake
air duct (5).
All build versions:
Installation:
Catches (1) on brake air duct (2) must not be damaged.
Release nuts (1) and remove underride protection (2) in
direction of arrow.
Installation:
Nuts (1) on underride protection (2) must not be damaged.
RA Removing and installing/replacing underride protection
BMW AG - TIS
12.02.2013 12:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -