X Series E53 X5 4.8is (N62-S) OFFRD
51 71 412
Removing and installing rear spoiler
Lever out covers (1) on left/right and release screw underneath.
Release screws (2) on left/right and screw (3).
Remove rear spoiler and set down on a clean surface.
Installation:
If necessary, make a note of number of shims on screws (2) and
(3) and refit them during installation at same position.
Tighten screw (3) first.
Tightening torque 51 71 2AZ.
Vertical adjustment,
refer to Gap dimensions, body.
Installation:
Threads (1) on rear spoiler (3) must not be damaged.
If necessary, replace faulty tapes (2) (dual-lock tape).
RA Removing and installing rear spoiler
BMW AG - TIS
12.02.2013 12:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
