X Series E53 X5 4.8is (N62-S) OFFRD
61 11 ...
Replacing wiring harness at front left
Remove front bumper trim.
Remove wheel arch cover at front left.
If necessary, remove horn (anti-theft device).
Remove driver's seat.
Disconnect battery negative lead.
Remove lower left trim from instrument panel.
Remove footwell side trim panel on A-pillar on left.
Remove adapter plate.
Remove storage tray.
Release cable strap (1).
Release screws (2) and remove plate (3).
Caution!
Under not circumstances bend carpet.
Cut carpet (1) as illustrated as closely as possible to A/C unit.
Installation:
Join cutting lines at marked points (2) with cable ties (short)
from repair kit.
RA Replacing wiring harness at front left
BMW AG - TIS
12.02.2013 13:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
