X Series E53 X5 4.8is (N62-S) OFFRD
Installation:
Before installing wiper arms, allow wiper motor to return to its rest
position.
To ensure the wiper system works properly, check and correct the
contact angle of the wiper arms.
In event of deviations from specified value, correct contact angle
using adjusting screw (1).
Check contact angle of wiper arms again.
Grip adjusting screw (1) and tighten nut (2) with special tool
61 6 250 .
Observe tightening torque, 61 61 6AZ.
Secure nut (2) with locking varnish.
RA Removing and installing mounting bracket for windshield wiper system completely
BMW AG - TIS
12.02.2013 14:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
