X Series E53 X5 4.8is (N62-S) OFFRD
63 13 200
Removing and installing/replacing front left or
right auxiliary turn indicator light
Slide auxiliary turn indicator light (1) forwards and remove.
Installation:
Ensure that seal is correctly seated.
If necessary, replace seal.
Snap retaining hook (2) into fender.
Disconnect plug connection (1) and remove auxiliary turn
indicator light (2).
Turn bulb holder (3) counterclockwise through approx. 45
°
and
remove.
Pull bulb out of holder.
Note:
Do not touch glass part of bulb with bare fingers. Only touch bulb
on its base or with a clean cloth or packaging of light bulb.
Note type of bulb.
RA Removing and installing/replacing front left or right auxiliary turn indicator l
BMW AG - TIS
12.02.2013 15:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -