X Series E53 X5 4.8is (N62-S) OFFRD
Vehicle without rear compartment fan:
Remove fresh air grill in footwell.
Unclip carpet on left and right.
Disconnect plug connection (1).
Release nuts (2) with special tool
11 4 190 .
Raise airbag control unit (3) slightly and pull out.
Installation:
Ensure grounding cable is correctly laid.
Observe tightening torque, 65 77 1AZ.
RA Removing and installing airbag control unit
BMW AG - TIS
12.02.2013 16:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -