X Series E53 X5 4.8is (N62-S) OFFRD
67 31 540
Removing and installing/replacing drive unit
for head restraint adjustment (comfort seat)
Remove rear panel at top and bottom from front seat
backrest.
Turn plug connection (1) in direction of arrow and disconnect
from backrest frame (2).
Disconnect plug connection (1).
Detach shaft (1) in direction of arrow from drive unit for head
restraint adjustment (3).
Remove retaining rings (2).
Remove drive unit for head restraint adjustment (3) in direction of
arrow from backrest frame (4).
Installation:
Make sure shaft (1) is correctly located in metal fold of backrest
frame (4).
Removal and installation only:
Do not turn spindle (1) in order not to change measurement A.
Replacement only:
Adopt measurement A of removed drive unit for head restraint
adjustment (2); if necessary, adjust by turning spindle (1).
RA Removing and installing/replacing drive unit for head restraint adjustment (comf
BMW AG - TIS
12.02.2013 17:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
