X Series E53 X5 4.8is (N62-S) OFFRD
Installation:
Bowden cable (2) must be located in holders (1) of backrest (4)
and pass through bore hole (3).
Remove lockplate (1) and unhook actuating rod (2) for backrest
release.
Watch bush (3)!
Caution!
Do not withdraw actuating rod (1) from both guides (2) in
control lever for backrest release (3).
Release screws and fold back backrest lock.
RA Removing and installing / replacing rear center safety belt
BMW AG - TIS
12.02.2013 17:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
