X Series E53 X5 4.8is (N62-S) OFFRD
72 12 000
Removing and installing/replacing airbag
module on passenger side
Special tools required:
•
00 9 323
Warning!
Observe safety regulations for handling airbag modules and
pyrotechnical seat belt tensioners, refer to MG 72.
Incorrect handling can activate airbag and cause injury.
Warning!
After every airbag triggering, the passenger airbag cover must
be replaced!
We cannot guarantee that the retaining straps of the airbag
cover will not be damaged when the airbag is triggered.
If a damaged airbag cover is reused, we cannot guarantee
that the retaining straps will work properly.
Remove passenger airbag cover and place on instrument panel.
Note:
To assist removal, insert special tool 00 9 323 (plastic wedge)
on both sides of catches into instrument panel and lift up cover.
RA Removing and installing/replacing airbag module on passenger side
BMW AG - TIS
12.02.2013 17:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -