X Series E70 X5 3.0d (M57T2) OFFRD
Picture shows M57T2:
Release and disconnect coolant hoses (1).
Release screw and remove lines (2).
Installation:
•
Replace sealing rings.
•
Tightening torque 17 22 1AZ
.
Unclip hose (3).
Release screws (4) and remove heat exchanger (5).
Installation:
•
Tightening torque 17 22 2AZ
.
Important!
Distance between oil cooler line and ribbed V-belt must be at
least 25 mm.
Check fluid level in automatic transmission.
Refer to Maintenance and General Information, Main Group
00.
RA Removing and installing/replacing heat exchanger for automatic transmission (M57
BMW AG - TIS
03.02.2013 19:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
