X Series E70 X5 3.0d (M57T2) OFFRD
Release screws and remove holder (1).
Tightening torque 18 20 4AZ
.
Release screws and remove holder (1).
Tightening torque 18 20 6AZ
.
Release screws and remove bracket (1) with suppression line.
Tightening torque 18 20 7AZ
.
Note:
Texts refer to and illustrations show the left side. The procedure is
identical for the right side.
Lower exhaust system carefully.
Installation:
Check rubber mount for damage, replace if necessary.
Check exhaust system for leaks.
RA Removing and installing complete exhaust system (M57T2)
BMW AG - TIS
03.02.2013 19:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
