bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 992 > < 13 RA Removing And Installing_replacing Belt Pulley On Vane Pump For Power Steering
Page 1
background image

32 41 250

Removing and installing/replacing fluid
reservoir for power steering

Special tools required:

32 1 260

Warning!

Danger of poisoning if oil is ingested/absorbed through the
skin!

Risk of injury if oil comes into contact with eyes and skin!

 

Important!

Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.

Seal off hydraulic lines with plugs.

Necessary preliminary tasks:

Draw off and dispose of hydraulic fluid from fluid reservoir

Unscrew nuts.

Remove shims.

Installation:

Replace self-locking nuts.

Tightening torque  32 41 1AZ

.

RA  Removing and installing/replacing fluid reservoir for power steering

BMW AG - TIS

03.02.2013  21:38

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA Removing And Installing_replacing Fluid Reservoir For Power Steering|Page 992 > < 13 RA Removing And Installing_replacing Belt Pulley On Vane Pump For Power Steering