X Series E70 X5 3.0d (M57T2) OFFRD
41 62 005
Removing and installing rear lid upper
section
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 62 005).
Necessary preliminary tasks:
•
Remove spoiler.
•
Remove trims on rear lid upper section.
•
Disconnect all cable plug connections and pull wiring harness
out of rear lid.
•
Remove both gas-filled struts.
Note:
This work step must be carried out with a second person
assisting.
Close rear lid upper section.
Release screws (1) on both sides of vehicle.
Tightening torque 41 62 1AZ
.
Remove rear lid upper section.
Installation:
Install rear lid upper section at screw locations to hinge. This
dispenses with the need for adjustment after installation.
If necessary, adjust rear lid upper section.
If reversing camera optional extra installed:
Calibrate reversing camera.
RA Removing and installing rear lid upper section
BMW AG - TIS
04.02.2013 00:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
