X Series E70 X5 3.0Sd (M57T2) OFFRD
11 61 050
Removing and installing air intake manifold
(M57T2)
Necessary preliminary tasks:
•
Remove centre equipment compartment bulkhead (E65 only)
•
Remove tension strut (E60/E61 only)
•
Remove tension strut (E83 only)
•
Remove acoustic cover at front and rear
Disconnect plug connection (1).
Release screw (2).
Open holder (3).
Disconnect plug connection (4).
Pull off vacuum hose (5).
Pull off vacuum hose (6).
Release injector wiring harness and lay to one side.
Unlock and detach charge air hose (1).
Release pipe (2).
Release screw connection along lines (3).
Pull off vacuum hose (4).
Installation:
Replace all seals.
Assemble engine.
Check function of DDE.
RA Removing and installing air intake manifold (M57T2)
BMW AG - TIS
05.02.2013 01:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -