X Series E70 X5 3.0Sd (M57T2) OFFRD
13 62 560
Removing and installing/replacing air-mass
sensor (M57TU TOP)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
•
Remove upper section of intake filter housing
Release screws.
Remove air-mass sensor (1) in direction of arrow.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing air-mass sensor (M57TU TOP)
BMW AG - TIS
05.02.2013 02:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -