X Series E70 X5 3.0Sd (M57T2) OFFRD
18 12 050
Replacing centre muffler (M57T2)
Special tools required:
•
00 2 210
Warning!
Scalding hazard!
These tasks should only be carried out on an exhaust system
that has cooled down.
Note:
If the cutting line is not marked by a punch mark in the pipe,
determine the cutting line by means of the pipe length on the new
centre muffler (3).
Carry over cutting line to faulty centre muffler (3) and mark out.
Secure centre and rear mufflers against falling down.
Cut exhaust pipe at marked point with special tool 00 2 210 and
deburr with a standard tool.
RA Replacing centre muffler (M57T2)
BMW AG - TIS
05.02.2013 03:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -