X Series E70 X5 3.0Sd (M57T2) OFFRD
24 11 010
Removing and installing/sealing or replacing
transmission sump (GA6HP26Z)
Important!
Remove transmission sump only after it has cooled down.
After completion of work, check transmission oil level.
Use only the approved gear oil.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Remove assembly underside protection
•
Remove heat shields
Remove oil drain plug (1).
Tightening torque: 24 11 6AZ
.
Drain automatic transmission fluid.
Installation:
Replace oil drain plug.
Recycling:
Catch and dispose of escaping transmission fluid.
Observe country-specific waste-disposal regulations.
RA Removing and installing/sealing or replacing transmission sump (GA6HP26Z)
BMW AG - TIS
05.02.2013 03:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -