X Series E70 X5 3.0Sd (M57T2) OFFRD
37 11 ...
Replacing pressure relief valve for active
stabilizer at front
Warning!
Danger of poisoning if oil is ingested/absorbed through the
skin!
Risk of injury if oil comes into contact with eyes and skin!
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Close off pipe connections with plugs.
Note:
Replace pressure relief valves in pairs only.
Necessary preliminary tasks:
•
Remove front underbody protection
•
Remove both stabilizer links from stabilizer
Important!
Risk of damage!
First adjust minimum distance (A) = 3 mm between
control line (1) and oscillating motor (2).
Then adjust control line (3) with minimum
distance (B) = 8 mm to control line (1).
RA Replacing pressure relief valve for active stabilizer at front
BMW AG - TIS
05.02.2013 09:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -