X Series E70 X5 3.0Sd (M57T2) OFFRD
Important!
For following severance cut, do not damage sunroof water
drain hose.
Mark severance cut (1) in accordance with measurement and cut.
Measurement a = approx. 200 mm from roof edge.
Open adhesive bonds in areas (1).
Open weld joints in areas (2).
Feed out water drain hose for sliding sunroof (3).
Installation:
Do not weld new part in areas (2).
Make sure water drain hose is correctly seated.
Preparation of new part:
Mark new part in accordance with severance cuts above and cut.
Installation:
Adjust new part to fit with straightening attachment or universal
mount.
Weld in reinforcing panels at all severance cuts.
Apply adhesive in areas (1).
RA Replacing front left door pillar (front side panel removed)
BMW AG - TIS
05.02.2013 10:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -