X Series E70 X5 3.0Si (N52K) OFFRD
17 00 005
Draining and adding coolant (N52K)
Warning!
Danger of scalding!
These tasks on the cooling system should only be carried out
on an engine that has cooled down!
Important!
Wear protective gloves and goggles.
Risk of slipping due to coolant on the floor.
Important!
Lifetime coolant filling:
Never reuse used coolant!
When replacing and removing components which rely on the
corrosion protection effect of the coolant, it is essential to
change the coolant. The cooling system must therefore be
drained and refilled.
In the case of other removal work involving the draining of
partial quantities of coolant, replace these quantities which
have been drained with new coolant.
Installation:
Use only recommended coolant.
Observe mixture ratio.
RA Draining and adding coolant (N52K)
BMW AG - TIS
06.02.2013 16:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -